Bitcoin donations to: 1CE9UfWJcHBYkWPns7iqBqZgKhd5xfqEaM thanks!
Buy Bitcoins easily by clicking HERE and get $10 in free bitcoins!

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - vwflyer

Pages: [1] 2
1
General Discussion / Lost at sea 5 months without comms
« on: October 28, 2017, 01:16:16 AM »
My curiosity is killing me and itís probably too early to get all my questions answered by the news. But I know that there are some sailors in this group so maybe there are some good theories among you. How did these two ladies wind up without comms at sea?  Iíve read several news stories looking for the answer. Several said their comms died shortly after losing the engine. Sounds to me like maybe the battery died because the generator was engine driven. Would that be right?  Do many sail boats not have solar power so that you donít have to run the engine to charge the battery? It is supposed to sail after all. Even so, would they not have made the distress call on the HF  before the battery died?  Is it possible they didnít have an HF radio on board? Are they not required on ocean going vessels? One article said they lost the sat phone overboard the first day out. Does having a sat phone on board qualify for comms requirements at sea and thatís why they didnít use HF?  Many articles stated that they made distress calls for 92 days but were too far out for anybody to hear them. From this I surmise that their VHF radio still worked. Perhaps an HT which is why it still had juice. If so that HT battery has good life. So many questions, Iím afraid Iíll have to wait for more interviews from them. Glad they made it. I imagine theyíll do a few things differently the next time out.

2
General Discussion / HB-1B Go Box
« on: November 24, 2016, 10:02:11 PM »
I wanted a bullet proof go box for my HB-1B. A way I could throw it into whatever car I was driving, or take camping, boating, traveling, or wherever. I wanted it to be small and transportable and have everything I need inside of the one box. The one-size fits all approach always ends in compromises and this is no exception. This is what I've finally gotten assembled.

Pelican 1150 case.
HB-1B
Sotabeams EFHW Tuner

Usually I have the AC charger in top space but when camping or for SOTA I can replace it with an external battery pack for more runtime off grid.

Under the tuner is a QRP Guys paddle, earbuds, 3ft of RG-174, power cable for external battery, small bungees.

Under the radio is 50ft of paracord, s-clips, EFHW linked wire for 20, 30, 40 meters.







3
General Discussion / NVIS or ground wave?
« on: October 03, 2016, 01:53:33 AM »
Big back story here.
I've started playing around with QRP NVIS to see what it's capable of. I set up my computer to auto start a recording of my home radio's audio at certain times. I then turn the radio on and tune it to the freq I want to try. I then go out into the mountains and set up my QRP rig and simply string my EFHW from tree to tree as high as I can reach. When I know the computer has started recording I call CQ. If someone answers great. If not no big deal, I just want to see if my home QTH recorded me and how strong I was. So far I've only made three attempts but plan on many more at different distances, on different bands, at different times of day and in different terrain. The first attempt was at 130 miles on 40 meters in the mountains at 9:00 AM. My recording heard absolutely nothing. Then it occurred to me that my noise floor on 40 at my home QTH is always S7 or more. That could be why I didn't hear anything. If my signal was S5 it would have been buried in the noise. So I decided to try 30 meters out as it's a lot quieter than 40 at home. On the second attempt  my recording never started for some reason so who knows.

On my third attempt I was just going to a friend's house in town about 12 miles away from me. He has a big yard so I figured I'd take the little rig along and try a 30 meter contact from there. Long story not so short, my recording picked up my CQ quite well at 12 miles on 30 meters at 3 PM.

So here's my question. Was I using NVIS or ground wave to reach home? Both of our houses are in low spots so while there are no big hills between us there is also no chance of line of sight communications. My 2 meter FM base station at my home can't get more than about 8 miles towards town when talking simplex with my mobile rig and both are running 50 watts, not 4 watts that my QRP rig runs. The antenna was oriented for NVIS and not ground wave but at 12 miles it might not matter. Any opinions?

4
Radio Reviews, Questions and Comments. / QYT KT8900 Dual Band 25W Mobile
« on: August 13, 2016, 07:07:47 PM »
I just came across this rig. I've never seen it before but you can't beat the price for a duel band mobile. Has anybody heard anything good or bad about these radios? I don't see where in the specs it mentions receive current draw but it's small enough to be a decent go box radio with more power than a handi talki.

http://www.banggood.com/QYT-KT8900-136-174400-480MHz-Dual-Band-25W-Mobile-Radio-Transceiver-Walkie-Talkie-p-1026663.html?currency=USD&createTmp=1&value_ids%5B%5D=29&utm_source=google&utm_medium=cpc&utm_campaign=Crc-dm-c7&utm_content=ruby&gclid=CJ3q9r_0vs4CFQouaQodwZYGCA

5
Antennas / Magnetic loop to cut the noise?
« on: February 12, 2016, 06:14:36 PM »
For a while now my brother and I have been trying to set up a sked. We are still struggling to find a band and time that is reliable. Part of the problem is the noise level he has to deal with at his QTH. He lives in the Seattle area and has to deal with a constant noise level of s6 and up on all bands. I can often hear him fine but I'm down below his noise level. He is currently using a G5RV installed stealthily in his backyard. He lives in a HOA and can't put up an obvious beam.

We have been researching magnetic loop antennas for their high Q and noise rejecting characteristics. I know some of you here have experience with them so I was hoping you could give me some insight into them. Do you think that they are a viable option for this situation?

6
General Discussion / 1,600 mile sked
« on: October 23, 2015, 07:25:32 PM »
Well, my brother finally got his General license. He lives in the Pacific NW and I live in the South, about 1,600 miles apart. He plans on bugging in so he has a solar generator and a 100w HF rig. He lives in an HOA so has to have a stealth antenna. He is starting out by trying a G5RV inverted-V in his back yard. The feed-point is at his house peak and it slopes down to the top of his fences in the back where it runs along the top of the fence for a bit. The ladder line is running horizontally through his attic. He lives on a corner lot so it isn't really visible to people within the HOA.

I have a OCF 80 meter dipole inverted-V with the apex at about 30ft. Both of these probably make fine NVIS antennas but aren't the best for DX. We have been experimenting with setting up a sked between us but so far have not found a time or band that has made SSB viable with our situation. I've been telling him he now needs to learn morse but I can't rush him. He has heard me sending CW on several occasions but he can't respond or understand.

Finally I told him to download a PSK31 program for his phone and just hold it up to the radio's speaker while I send. It decodes my PSK31 just fine. He held the radio's microphone to the iPhone's speaker and sent me PSK31 and it works as well. So now I'm helping him build an interface that will go between the iPhone and the radio to make it even more reliable. He can easily keep his phone charged with the solar generator. This seems like the best solution until he learns morse code and even then I have found at times that PSK31 can be decoded at lower levels than I can copy CW. In fact, when my brother sent PSK31 to me using his iPhone and microphone I could just barely hear the signal coming out of my radio but the computer decoded it just fine. Had it been CW that far down into the noise I would not have been able to copy it at all.

We are not about to buy amps to help us out. I would some day like to put a DX antenna on my roof like a hex-beam or spider-beam or something and point it right at him but that will wait till I have more money. With his HOA, he doesn't have that option. I was impressed with Ray's magnetic loop when I spoke with him the other day. I wonder if one of those would help him pull my signals out of the mud.

Several of my co-workers are down in Tepic, Mexico right now and are expecting the hurricane to hit them any time now.  I would be there myself right now but my coworker went in my stead since today is my oldest's 15th birthday which I didn't want to be gone for. They are stocking up on supplies and taping the windows but none of them are hams and don't have a radio to fall back on if they lose cel phone and internet. They do have a Spot tracker and a sat. phone though so I'm sure they'll be fine in the comms area but I still wish they had an HF rig with them. They are coordinating with local authorities to start relief flights right after the storm passes. There is no ARES equivalent in Mexico. If there were I'd probably be a part of it. It would sure help us coordinate our flights when commercial comms go down.

7
Technical Corner / BangGood QRP tuner
« on: October 23, 2015, 04:04:40 PM »
Hi guys,
Does anybody have experience with this inexpensive tuner? I have ordered a few kits and things from this outfit before and so far I've been pleased with what I've gotten but I figured I'd ask first.
http://www.banggood.com/QRP-1-30-Mhz-Manual-Antenna-Tuner-Tune-Kit-p-914663.html

8
General Discussion / QRP Works!
« on: May 19, 2015, 11:23:46 PM »
At least it did last weekend. On Saturday I got out my new MTR to try out the linked EFHW I just built for it. I also took the opportunity to save a CQ to the radio's keyer memory. I was experimenting with using the beacon mode where it would continue to send CQ until I stopped it but I was having trouble testing it because someone would come back to me at the end of the first CQ every time I tried it. I almost never get that kind of success on my QRO rig and permanent dipole. I don't know if it was luck or good propagation conditions or the fact that the memory keyer has a better fist than I do so people are more willing to answer (my QRO rig doesn't have a memory keyer). Whatever the reason, it has made me a belever in portable QRP. It gives me some hope that I'll actually successfully activate some summits this summer. I just hope that it doesn't work too well and I wind up having to deal with a pileup. I'm still green when it comes to morse code so I don't know if I could handle multiple summit chaser call signs coming at me at all at once.

9
Radio Reviews, Questions and Comments. / Next QRP CW Rig?
« on: April 22, 2015, 02:01:39 AM »
The rockmite is really fun. Every QSO with it is exciting. The other day I tried to have a QSO with KK0G but the rock's freq was in use and stayed in use for a long time. It would have been nice to have the option of moving up or down the band a little to a clear spot. I did eventually make a contact that day but not with KK0G. This summer I will be going to my home state of Washington. I hope to try being an activator of summits with SOTA. there is a four point summit that has not been activated yet and I will be staying with my in laws who live halfway up the hill. It will take me 20 minutes to hike to the top from the door of the house. There are lots of 6 and 8 point summits within a half hour drive radius so I will enjoy having an excuse to hike up some of them that I have seen all my life but never hiked up. 
All this to say, I'm already anxious to get another QRP rig. One that is a little more flexible than the rockmite and will give me a better chance of having successful activations (4 QSOs minimum for summit activation). So which to get?
I'm into building them but don't know if I'll have time to do it before this June when I leave. I'm sure I will eventually build something but probably not before this winter. In the meantime I want to buy something ready to go for this summer.
LNR has the mountain topper prefabbed. It's supper small and has low power consumption. Youkits HB1A and EK1A are cheaper, have a real tuning knob, a wide range receiver and veriable width IF filter for listening to SSB QSOs anywhere on the band, and an optional internal battery. It's a bit bigger and heavier but that's about the only downside I can see. Does anyone have any words of wisdom for me? Is there another option that is in this $250 ballpark that I'm going to kick myself for overlooking?  I've actually already ordered the mountain topper (grabbed one before the limited run ran out) but they take a long time in processing the order so after looking at the youkits I'm tempted to cancel my order and get one of those.

10
Technical Corner / Repurpose HF gear
« on: December 31, 2014, 02:42:01 AM »
Happy New Years eve gang. Since you all have your thinking caps on from PuJo's question I figured I'd slip one in myself. About 3 years ago the mission I fly for decommissioned all of its HF stations. We used to use them to keep in touch with the missionaries living in the mountains of Mexico. We had a morning sked with them and they'd let us know that they were all right and if they needed supplies flown to them or if the plane needed to go out there for some other reason. After all of them got satilite Internet and determined it was reliable enough the mission finally decided to quite paying for the use of one of the mexican commercial HF freqs and the radios were taken out of service. They have let me do what I will with the radios. They are simple single channel 100 watt radios that are currently crystaled just below the 80 meter band.

So, what do I do with them? Is there a market for single channel radios like these? I thought they could make nice digital stations for a preppers digital network. I'd have to re-crystal them and figure out how to turn down the power. I doubt they can handle digital duty cycle at 100 watts.




11
Technical Corner / Yet another RockMite thread
« on: August 19, 2014, 09:41:35 PM »
My 20 meter RockMite has arrived! This will be my first transceiver kit. I'd been talking to my wife about getting one for some time and I finally ordered one without telling her. It came pretty quickly. When she saw that I had gotten it she said that she was planning on buying it for me for my birthday. Now she says I can't build it until after my birthday which doesn't come along until the end of November. We shall see who will win this one.  ::)
I ordered it with the $10 accessory kit which comes with two pots for volume and keyer speed controls, transistor for increased power output, heat sink, on/off switch, power indicator LED, and a bunch of resistors (one for the LED and one for the power mod, not sure what the others are for). The funny thing is that the optional transistor has identical markings to the one that came with the stock RockMite. I think that both transistors are the more power ones. The stock kit also came with a heat sink and green LED so I'm not sure why the accessory kit duplicated those.
This RockMite also came with a ten pin SIP socket and short crystals. I'm assuming I'm supposed to cut the SIP socket into three pin sockets and put the crystals in them but the instructions aren't explicit about it. They probably just assume I know that I can cut the socket to the desired length and don't have to tell me to do it. It will be nice to be able to easily switch between 14,050 and 14,060 though.

12
Morse Code / CW gets a nod from Fox News
« on: May 19, 2014, 10:54:54 PM »
At the date of this posting this story can be found on Fox's front page on the web.

http://www.foxnews.com/tech/2014/05/19/ham-radio-old-technology-gets-new-respect/?intcmp=features

13
Morse Code / My Econo Keyer is fun but not working right.
« on: May 14, 2014, 06:21:47 PM »
Hi guys. I decided to finally learn how to use paddles. Because of my tight budget I bought what came up at good prices. I wound up with a Ham-Key iambic key and an MFJ-401C keyer. I've been using the keyer's sidetone off the air to just practice using a paddle for the first time. I can tell it's going to be nice having QSOs with this when I get a little better. Hopefully others will understand me better with this than my straight key too but right now I still make too many mistakes with the paddles. I often key to many or too few dits. As it stands though, I can't get on the air with this even if I wanted to. It continually keys up my Kenwood TS-140S as soon as I plug it into the key jack. I measured the resistance of the MFJ's key output jack while not keyed and it is about 1500 ohms. Apparently that is too little for the Kenwood and it sees it as a closed circuit. I know that a few of you here are kind of electronic savvy so I thought I'd throw this problem out there and see if anybody has any obvious answer to my frustrating situation.

14
General Discussion / Tribute
« on: February 10, 2014, 03:30:17 AM »
My son was born today; John Logan. He's not really named after me. He and I are both named after my grandfather who has been SK since 2001. When I think of a ham I think of him. He started out building radios from kits when he was a boy in the early '30s. His love of electronics and his desire to use his knowledge and skill to help others stayed with him all his life. When he went to war he did so as the radio operator on a B-24 Liberator in Europe. After the war he got work as an electrician for a lumber mill. He started raising a family but still had time to get his ham license and study for an engineering degree by means of correspondence classes. After getting his degree he got hired by Martin Marietta at the hight of the space age. He worked alongside my other grandfather there. Grandfather Roger drew up the plans for the rocket components and grandfather John used the plans to build them. He always stayed abreast of technological developments.

He wasn't a good teacher though. When I was very young I remember riding with him in his car. He was holding a conversation in CW while driving. I remember him driving along and listening to the dits and daws as if he was listening to the oldies station on the radio. I must have shown how impressed I was because he later decided to help me learn CW. He lent me a solidly built key and oscillator and told me to go practice. He didn't give me anything to listen to to learn to copy and it was before a guy could get online and find training aids. Needless to say, I never learned CW that way.

He taught everything that way. Learn by doing. I guess it's how he did it and it worked for him. Grandma about had a heart attach when grandpa taught my brother to drive the snowmobile. The lesson consisted of these words, "squeeze this lever with your thumb and she'll go." So he squeezed. My grandmother saw my brother shoot past the kitchen window, barely dodge two parked cars and a large tree before my frightened ten year old brother thought to release his death grip on the lever. My grandfather thought it was  a hoot.

He was the handiest guy in town. Everyone said he could fix anything. The school, ferry boat, and lumber yard would all call him up on a regular basis long after he had retired when they couldn't get something working. That is how he died. He was backed over by a log mover while he was troubleshooting another machine. He lived on an Indian reservation and even though he was not a member of the tribe, or even an Indian for that matter, they gave him a plot in the tribal cemetery and a tribal burial.

I inherited his ham shack, the heart of which was his Collins KMW-2. I'm just now dusting it off and firing it up. I'm a bit scarred of blowing something up in it. It's been sitting for so long and I know nothing of old tube radios.  It still seems to grab the signals though and I've measured 80 watts out of it. Now I'm learning CW and am anxious to start CW QSOs with my grandfather's old rig just like he did. I've had my ham license for ten years now and it's come time for renewal. I decided that grandpa's old call sign should be what comes out of his rig and so I've applied for his call sign. I hope they give it to me. I'm looking forward to the day I can teach little John how to operate CW on his namesake's radio.

15
Morse Code / First CW QSO
« on: January 17, 2014, 07:25:55 PM »
Well, I did it ;D
I answered someone's CQ on 20 meters. He copied me fine but I made a couple of mistakes and my ability to copy went down by at least 3wpm under the stress of it. I didn't catch everything he said but I got most of his call and skcc number. It was good that I copied his skcc number right. I looked him up there to fill in the missing call letter. Hey raybiker73, it was good that I had registered with skcc myself. I don't know why he assumed I was registered with them, perhaps because I answered his CQ but he wanted me to transmit my skcc number. I told him I'd have to look it up as I didn't know it and asked him to stand by. After I came back with it he thanked me and signed off. I must have been trying his patience or taxing his brain to much trying to copy my loose fist. He didn't seem to want to rag chew.
But in the end, he was courteous and I am stoked.
Thanks to all for all of your encouragement.

Pages: [1] 2