Most QRP rigs can run forever on batteries so small, you can carry them in your pocket. They can be recharged from a flexible solar panel hung on your backpack. Sure, you might only run 5-10W, or even 1W, but after a few miles of walking, I can guarantee you that you will be throwing things away right and left, including that car battery you hoped to use to power your big Yaesu. Even mobile transceivers producing more than a few watts will require quite a power supply. Some allow to set their output power much lower, and that is great. You still need to look at receiver current draw. My Elecraft K1 draws 55mA on receive! A K2 draws 150mA, a Yaesu FT-817ND draws 450mA... Some radios draw much more. How heavy a battery are you willing to carry? I use the 2.9Ah model shown below, which is the maximum weight I am willing to carry for that purpose.
Then you have the matter of the antenna. You can't carry a disassembled vertical with you. For HF, you will need a substantial antenna, especially with low power. I find the end-fed dipole to be perfect. You can find the impedance matching boxes here: http://earchi.org/proj_homebrew.html. I made one, and it works great with a 35.5ft wire for 40 to 15m. Some models are single-band, without requiring a tuner. I plan on making more, you guys let me know if you want one. I get copper-cald steel wire (#532) from http://thewireman.com/antennap.html. I really don't want to carry any more than necessary. A trip started in decent conditions, given the circumstances, can quickly turn into hell in a New York minute. Even if you have a car, that might not last the whole way. Without rule of law, anything is possible. If you end-up on foot, make sure you can carry your gear at a fast pace for a while. Which brings me to another subject to explore in a future article: Are you in decent shape physically? Do you spend too much time on your favorite chair enjoying QSOs in you Ham shack, eating blueberry muffins? (I'm dying for one right now!). You can't prepare selectively. It might upset you to hear this, but unless you have valid medical reasons not to diet and exercise (one doesn't work without the other), you are fooling yourself. |
Here is my first attempt at a "go-kit." I have a bug-out bag mind you, which is always a work in progress, that is another story. You are looking at an Elecraft K1, the above battery, a paddle mounted on a Rock-Mite 40 mini transceiver, and a wire antenna. Yes, there are two radios in that Pelican 1400 waterproof case. Even that I think is a tad too big. I plan on making a second kit with an SSB radio. Note that I always keep them in a grounded metal box for EMP protection. I believe that when things really go bad, QRP is the way to go, for mobility reasons. It is also easier to hide a QRP transmitter. Take the Rock-Mite for instance, you could keep one in your jeans back pocket. Small 2m handhelds take little space. They are also in essence QRP rigs. Remember that you might be carrying your bug-out bag.. I have thought of buying a cart, just in case, but that would draw a lot of unwanted attention. "When All Else Fails," right? You need to prepare for that. Most hams or preppers do not. Cost is also a major consideration, for me at least. There are quite a few other items I need to acquired before considering myself "ready." I am pretty far from it right now. In the meantime, the world seems to be going in the wrong direction at a rapid pace. So, the least I spend, still maintaining some standards, the faster I get ready. Buying small and light equipment is often more expensive (i.e. camping gear!), but fortunately that does not apply to radios. Look at the MFJ-94xx series for instance, they sell new for around $250, and you can occasionally find them for much less on Ebay. Much of the other stuff on Ebay is too heavy, but sometimes you stumble on a gem. I often search for "QRP," just in case. CW radios are the cheapest. A Rock-Mite mounted in an Altoids box might set you back $40, and will give you a nice minty breath! A Webber Tri-Bander kit costs $200 and outputs 5W. Ten-Tec sells a Chinese made CW transceiver for $249 (40/20m). A K1, the Ferrari of CW rigs, will set you back $300 to $530 (4-bands & auto tuner), and 30 hours of work. A Yaesu FT-817ND: $670. There is something for everyone. |
Go QRP! If you can do it with 5-10W, then you can do anything.