General Category => Antennas => Topic started by: gil on October 23, 2017, 04:33:03 PM
Title: Th Fabulous Moxon Antenna.
Post by: gil on October 23, 2017, 04:33:03 PM
I really wanted to make one video, but had nothing for this week so there will be a part 2.
Gil.
Title: Re: Th Fabulous Moxon Antenna.
Post by: lc65 on November 01, 2017, 07:38:16 PM
Gil, It is not clear how the three pieces are held together to make a solid unit ? Was the 6 M antenna too flimsy because of the splice or not related. Why not just use a regular straight fitting ? I presume this antenna is directional ? How much gain ?
Title: Re: Th Fabulous Moxon Antenna.
Post by: gil on November 02, 2017, 04:27:40 AM
QuoteGil, It is not clear how the three pieces are held together to make a solid unit?
Hi, I used a plastic rod inside the copper tubing for the gaps.
QuoteWas the 6 M antenna too flimsy because of the splice or not related.
Both because of the splice, plastic rods and the tubing being too thin. A 16mm tube will allow me to use a thick wooden dowel instead of a thin plastic rod.
QuoteWhy not just use a regular straight fitting?
Fitting for what?
QuoteI presume this antenna is directional? How much gain?
Yes, gain is around 5.8dbi.
Also see: http://moxonantennaproject.com (http://moxonantennaproject.com)