Hendricks 20m 10watt SSB rigs

Started by WA4STO, January 05, 2014, 11:58:27 AM

Previous topic - Next topic

WA4STO

W7ASA de WA4STO

Ray, have you come across the original design article for the 'ugly construction' of the monoband SSB rig?

And do you have any links relative to the solid state VFOs you were speaking of?

A friend here locally is interested in building a monobander but for another band that (I assume) Hendricks doesn't yet allow for.

Best 73

Luck, WA4STO
ARRL A1-operator, BPL Medallion holder, circa 1977
VUCC Satellite (all CW)
NTS(D) Digital Relay Station, Central Area
NTS(D) Target Station, CAN, TEN & NE
TCC Station "Fox"

RadioRay

Sorry for the delay, Amigo.

The rig that I am building is for  80 meters only.  I may see about modifying it after it's operating in it's original configuration.  Hendricks does have other SSB kits, most based on the BITx design.  Those - I have read - are easy to put onto other frequencies.

The DDS VFO that I used was from here:

http://www.pongrance.com/

I used their "Super VFO".  It's a very good kit and goes together smoothly, off sets are front panel programmable to match various I.F. mixing schemes.


73 de Ray  ..._  ._

 
"When we cannot do the good we would, we must be ready to do the good we can."  ~ Matthew Henry