Bitcoin donations to: 1CE9UfWJcHBYkWPns7iqBqZgKhd5xfqEaM thanks!
Buy Bitcoins easily by clicking HERE!

Use coupon radiopreppers for 20% off on the above site.

Author Topic: AN/PRC-64A conversion to 80m band  (Read 1453 times)


  • Newbie
  • *
  • Posts: 1
  • SMeter: +0/-0
    • View Profile
AN/PRC-64A conversion to 80m band
« on: March 13, 2018, 11:33:58 PM »
Hello all,
Does anyone have info or experience with using an AN/PRC- on amateur bands?

Regards, dannobyte


  • Administrator
  • Hero Member
  • *****
  • Posts: 777
  • SMeter: +43/-2
    • View Profile
Re: AN/PRC-64A conversion to 80m band
« Reply #1 on: March 14, 2018, 10:14:15 PM »
I do.  80 meters was a simple matter of adding crystals for TX/RX and peaking the stages per-the manual.  At the time I also crystalled in for the BBC ( long dead on that and most frequencies, these days, I am afraid. ) and use it in AM with great results.  I think I remember I had to mod it for forty meters, but a published spec on one site says it goes to 8 MHz another to only 6 MHz: I believe the '6' is correct. Power is going to require a home brew solution; 24'ish VDC for the transmitter power amplifier and 4.5 (?) for the receiver.   This is from memory and it's bee a long time. Mine came from Oz - surplused out from the very physically fit fellows in Perth ;-)

>RadioRay ..._  ._

Ps. Manuals on-line at this link:
« Last Edit: March 14, 2018, 10:23:17 PM by RadioRay »
"When we cannot do the good we would, we must be ready to do the good we can."  ~ Matthew Henry