Radio Preppers

General Category => Digital Modes => Topic started by: STN on January 21, 2016, 06:16:09 PM

Title: WolphiLink interface & FLDigi running on Linux [Setup and test PSK31]
Post by: STN on January 21, 2016, 06:16:09 PM
Hello guys.
I just posted a new video  where I setup and tested the WolphiLink audio interface, with FLDigi, on a laptop running AntiX-15 Linux. Normally we would use this audio interface on an android smartphone or tablet. I thought since I have a couple of them and they're so inexpensive anyway, it wouldn't hurt to make a cable or buy a splitter to see if this would work out well on the Linux laptop.

Another reason I'm using Linux it's because I'm sick and tired of Windows, and all the problems associated with it. Normally for ham radio digital modes I'm using Android and that works really well, but fldigi is not mature enough on Android yet. That's why I switched over to AntiX Linux for my emergency digital communications setup.

If anyone's interested the laptop is an Asus Eee PC 1000 H.

I'll be doing a lot more with fldigi on Linux, using thecFT,-817ND,  WolphiLimk, and my faithful magloop.
Here's a link to the video https://youtu.be/Fkrsf13sTco

STN
Title: Re: WolphiLink interface & FLDigi running on Linux [Setup and test PSK31]
Post by: snare on March 11, 2017, 05:52:25 PM
Great. Love to keep hearing more about this. Thanks for the video.
Title: Re: WolphiLink interface & FLDigi running on Linux [Setup and test PSK31]
Post by: Rescue9 on March 29, 2017, 10:42:47 PM
Finally got around to viewing this. Thank you very much. Any chance on getting a video up of the wolphilink interface with a KX2 cable build? Thanks!
Title: Re: WolphiLink interface & FLDigi running on Linux [Setup and test PSK31]
Post by: KC9CFL on February 23, 2018, 02:17:14 PM
I was wondering if anyone can do a video on jt65 & winlink using a Wolphilink and a linux laptop setup with the same configuration as STN had in his video. I use his FLDigi solution and it works great.