Radio Preppers

General Category => Military Radios => Topic started by: OH5ECD on March 19, 2025, 03:44:23 PM

Title: Racal vrm5080 problem
Post by: OH5ECD on March 19, 2025, 03:44:23 PM
HI!

My vrm5080 has lost it tx and rx. It powers up and in that process small his is heard on handset

It has been un used for a abt. year and it was working fine back then.

Any tips what migh be wrong in this set?

Title: Re: Racal vrm5080 problem
Post by: gil on March 21, 2025, 10:41:35 AM
Sorry no idea, I just replied to your PM..
Gil.
Title: Re: Racal vrm5080 problem
Post by: OH5ECD on March 24, 2025, 03:24:18 PM
I kept the unit powered for a an almost 20 hours and when switched on and off failure was still on but today as turned the unit on with same settings PUF it works as its should!

Now the green beast will be eating power for a while and we test it soon again!
Title: Re: Racal vrm5080 problem
Post by: gil on March 25, 2025, 06:31:45 AM
Great!
Here is a link to the manual in case you need it..:

https://www.dropbox.com/scl/fi/mrsbcpmfb4ff12staobvx/VRM-5080.pdf?rlkey=t5ujvvgewz82or4mk8uecvtzz&dl=0

Gil.
Title: Re: Racal vrm5080 problem
Post by: OH5ECD on March 25, 2025, 02:42:08 PM
Thanks!

So the test sequence is not full auto test like in tadirans?  Apparently it just reacts tx rx indicator
and other faults as they appear?