Bitcoin donations to: 1CE9UfWJcHBYkWPns7iqBqZgKhd5xfqEaM thanks!
Buy Bitcoins easily by clicking HERE!


Use coupon radiopreppers for 20% off on the above site.

Author Topic: Its never been cheaper to get into Ham Radio! 3 to 30Mhz Xcvr for $109 US  (Read 3333 times)

gil

  • Administrator
  • Hero Member
  • *****
  • Posts: 2873
  • SMeter: +76/-3
    • View Profile
    • Radio Preppers
Quote
Check this out, and have your wallet ready......

You f--ker, LOL! Well done.

Maybe I should get a similar case for my BitX40 still in its plastic box and not spend $100, but if I get some extra $ why not...

Gil.

Andywragg

  • Jr. Member
  • **
  • Posts: 81
  • SMeter: +8/-0
    • View Profile
I would have thought the BiTX40 would drop into the uBTX case with the addition of maybe a few different standoff holes.

You could certainly still use the front and rear IO boards with a bit of figuring out for the BiTX40 wiring loom.

Or you could get the uBITX and has access to more bands and increased functionality.


Kerching!!
Once a 'STAB in the Dark'
M6UAW

gil

  • Administrator
  • Hero Member
  • *****
  • Posts: 2873
  • SMeter: +76/-3
    • View Profile
    • Radio Preppers
There are a few radios I want to buy at the moment...

  • The uBitX, why not...
  • Weber MTR4b.
  • MFJ-9402X.
  • RT-351, brand new!
  • VRM-5080.

I have 110 items on my eBay Watch List, LOL.

Gil.

Sparks

  • Jr. Member
  • **
  • Posts: 77
  • SMeter: +5/-0
    • View Profile
There are a few radios I want to buy at the moment...

What about the Yaesu FT-817ND? Have you get one already? You have often stated that you'd like to own one, if memory serves me right.

https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=06014CD0AFA0702B25B12AB4DC9C0D27

What about this one?: https://www.universal-radio.com/catalog/hamhf/0818.html

gil

  • Administrator
  • Hero Member
  • *****
  • Posts: 2873
  • SMeter: +76/-3
    • View Profile
    • Radio Preppers
Never but yes, I would like one too!

Gil

Sent from my SM-G928F using Tapatalk


caulktel

  • Full Member
  • ***
  • Posts: 133
  • SMeter: +7/-0
    • View Profile
I ordered another uBitx, it should be here in a few days. It will be the V4 board with some improvements incorporated into the new PCB. I will be using a 3.2 inch Nextion touch screen display on this one.
I'm going to make numerous case improvements to this one, like bolting the finals to the case for better heat dispersion. Gil, you wont like this one because it's going to have a higher idle current draw than the previous one, but it isn't intended for portable use.
I look forward to starting work on it. Ill post my progress.

Joel
N6ALT