Radio Preppers

General Category => SDR Radios => Topic started by: jbeno on August 30, 2020, 01:57:24 AM

Title: Minion SDR
Post by: jbeno on August 30, 2020, 01:57:24 AM
Finally got my Minion SDR and tested it out tonight. How do you adjust the output power? When I'm transmitting, I'm not seeing anything more than 0.5 on the PWR meter. But in your videos, it looks like you're consistently at 5.
Title: Re: Minion SDR
Post by: gil on September 07, 2020, 06:16:15 AM
Hello, yes, I got 5 to 7W. I did not see an option to adjust power... Is your antenna resonant? Did you check SWR?

Gil.
Title: Re: Minion SDR
Post by: jbeno on September 08, 2020, 11:30:57 PM
Yeah, I tried with and without a tuner (Elecraft T1) on a resonant 20m antenna. The T1 clicks and tunes with a green light. If I shout into the Mic I see the PWR bar jump up to 5. I'm wondering if it's the Mic Gain or the phsyical Mic that I'm using: https://qrpver.com/accessories/microphone-headset-tangent-for-a-radio-station-qrpver-mic-02.html

What Mic Gain setting are you using? Do you have any audio filters on?
Title: Re: Minion SDR
Post by: gil on September 14, 2020, 04:53:12 AM
Hi, I don' remember, but SSB does not give you a precise power measurement. Use CW to see your power output. Also, there is no practical difference between 5 or 7W... Nobody will ever notice the difference...

Gil.